Адресный шлюз

ZX-G 1000 AD

Для управления и мониторинга производительности адресных систем ZITEX в режиме онлайн и удаленно было спроектировано и построено устройство под названием Адресный шлюз пожарной сигнализации. Это устройство размещается как часть сети RS485 рядом с другими панелями и ретрансляторами и подключается к этой сети через локальную сеть (проводную или через сеть WIFI). Устройство имеет отдельный и независимый источник питания/зарядное устройство (два резервных аккумулятора отвечают за питание устройства в случае отключения основного питания). После установления соединения между устройством Gateway и сетью RS485 с помощью графического программного обеспечения компьютера можно выполнить следующие действия:

Просмотр онлайн-статуса устройств и панелей

Просмотр истории журнала всех панелей онлайн

Обновление программного обеспечения всех сетевых панелей

Резервное копирование параметров конфигурации сетевых панелей

Настройка шлюзового устройства может быть выполнена двумя способами. По умолчанию подключение к локальной сети осуществляется через DHCP, но в некоторых случаях клиенты могут запросить определение статического IP-адреса, для чего было разработано и создано специальное программное обеспечение.

SCRIPT FOR SLIDER CAROUSEL

Адресная панель управления

ZX-G 1000 AD

Automatic addressing of all devices from the panel
ZITEX specialized and exclusive protocol
Hardware lock (dongle) and password for integrated protection at access level 4 to prevent system manipulation by irresponsible people
Networking of 32 panels or repeaters based on RS485 protocol with internal network card without the need for additional cards
Automatically address and register 32 panels or networked repeaters within 1 minute
Control and identify cabling defects and determine the exact location within the network
Control and identification of cabling defects and determining the exact location of cabling outages inside the loop
32 km coverage with 32 grid panels or repeaters 1 km apart
Control and monitor panels or repeaters networked with any panel or repeater within the network
Software and hardware control technology to eliminate false noise and alarms
Separate and independent addressing or simultaneous loops
Addressing 1000 devices in 4 loops in less than 30 minutes
Free access to all startup software, calculators and updates
Double-sided loop to supply voltage to the devices from both sides of the loop card in certain cases
Save 10,000 events with full details, no time limit
Print event logs via printer or copy using USB as a .txt file
Black box technology for storing the last 500 events indelibly in the panel memory in case of intentional or accidental deletion of events (access and retrieval only through the factory)

Two-way communication between panels and devices to make changes to devices and monitor their instant scheduling
Update motherboard, loop baseboard and repeater software via U-disk without the need to connect a cable to a computer
Modular structure of boards and panel loops and the possibility of upgrading from one to four loops for each panel
Ability to add a portable printer on the panel
96 programmable zones for 1 to 4 loops
Capacity of 250 devices per loop (twice the capacity of standard installation requirements)
Cover a distance of 1000 meters per loop
Physical protection with second door projection
Set time for notification in order to conduct periodic visits
Identify devices and their location in the loop
Securely store addresses and configuration information on the base loop and protect against deleting this information if the loop card is replaced
System health status report (voltage and current consumption of motherboard, loop cards, external relays, main power supply and backup panel)
Activation and monitoring of various inputs and outputs such as exhaust fans, dampers, positive pressure fans, extinguishing scenarios, emergency outlets and other peripherals using input-output modules and relays embedded on the panel

Predict short circuit protection circuit for power board and panel
Protection against the effects of electromagnetic fields and electric and electronic shocks in all circuits
Grouping devices and zoning and performing all control and reporting operations without the need for a direct connection to the computer through the panel itself or through the configuration software at access level 4
Define and program system outputs such as sirens and side relays through access level 4 panel or through configuration software
Define and program the status of input-output modules and conventional zone modules on the loop through the panel at access level 4 or through the configuration software
Ability to define latency for panel outputs
Ability to define day and night modes to change the sensitivity and class of detectors
Graphic table showing devices based on type and status in the relevant menu
View online streams and alarms on all devices and entire system loops
Ability to disable the desired devices, zones and loops
Engineering testing of sending and receiving data and identification of communication problems in this process
Rename devices and zones through the panel or configuration software
Three modes to activate the zone output: normal mode, two devices of one type and two devices of two different types
Ability to change the address of devices
Ability to add a new device to the loop and assign the address separately
Two outputs for conventional siren in addition to loop power sirens with the possibility of installing 10 sirens for each output

Set sirens in both Zonal and Common modes for alarm and discharge modes
Setup without the need for a license and connection to a computer
Professional engineering design, standard materials, ABS heat, shock and vibration resistant
Ability to install surface and built-in
Wiring glands and corridors for easy and principled installation
Specialized power supply to prevent damage due to voltage fluctuations
Use of socket terminals and allocate enough space to set up the system
Double-layer metallized fiberglass circuit with moisture, vapor and corrosion resistant layer
Production of electronic boards using modern equipment based on SMT technology
Specialized programming
6-inch screen with 10 lines of 40 characters to view all errors, alarms and other events in full
LAN and BMS output to connect to graphic software for controlling devices and building management system via gateway
Manual programmer for manually addressing devices when adding new devices to the loop or reading the addresses of devices installed inside the loop without the need to use a panel
Current leak test technology to identify the exact location of current leakage in the wiring system
Has the mark of the national standard of Iran and conforms to the international standard EN 54-2

Размер продукта

< 8 CM >

< 28.4 CM >

шлюз

Technical Specifications	ZX-P 1000 AD
Supply voltage	230 V A.C (-15%_+10%), 50/60 Hz
System voltage	20-30 V D.C.
Zone indicator (LED)	96 PCS
Output Fault	1 relay (24 V D.C) 3 A
Output Fire	1 relay (24 V D.C) 3 A
Output Alarm	2 lines, each line: 24 V
Battery required	2 x 12 V, 7.2 Ah
Degree of protection	IP 30
Functional temperature	-10 °C — +50 °C
Functional humidity	(Non-condensing) 5% — 95% RH
Printer	Optional
Dimensions	510 x 390 x 110 mm
Number of loops	4 3 2 1
Loop capacity (number of parts)	4 x 250 3 x 250 2 x 250 1 x 250
Standard requirement	EN 54-2 Installation of more than 512 detectors or callpoints in a non-standard panel
Weight without battery	8.8 Kg